Metal-Technik road sweeper 1.4 m for tractor and loader

Would you like to set the specification and tailor the sweeper to your individual needs?

We can prepare a mounting for any type of equipment — tractor, excavator, loader, forklift and many other machines

Get in touch with our sales engineer!

E-mail address: sklep@agrowow.pl

Telephone number: +48 880 261 210 | +48 504 947 222

We will gladly help you choose the right configuration and answer any question you may have.

Other widths are also available: 1.6 m ; 1.8 m ; 2.0 m and 2.4 m

- Manufacturer: Metal-Technik

- Catalogue number: MF14ZA

- Manufacturer's designation: Sweeper

- Width: 1400 mm

- Length: 2030 mm

- Height: 1200 mm

- Weight: 325 kg

- Cylinder: 1 / 2

- Water tank capacity: 200 L

- Waste container capacity: 140 L

- Oil flow: min. 40 max. 60

- Oil pressure: 140 bar

- Brush diameter: 600 mm

- Hitch: at the rear and at the front of the tractor, cat I and II

- Hydraulic lifting of the waste hopper

- Rubber skirt between the brush housing and the debris pan, limiting the raising of dust

- Easily replaceable brushes

- Pneumatic wheels that damp vibrations from the ground

Optional extras at additional cost:

- Water tank

The water tank in the road sweeper supplies the water spraying system, which is an integral part of the machine. Its main purpose is to minimise airborne dust during the work of the sweeper, which significantly improves the working conditions of the operator and the quality of cleaning. By spraying water onto the brush and the working surface, the sprinkling system makes it possible to bind the dust effectively and prevents it from spreading into the surroundings. The tank is usually made of durable and damage-resistant materials, and its large capacity provides an adequate supply of water for longer work. The sprinkling system combined with water significantly increases the performance of the machine during sweeping both in urban and in industrial areas, which makes it an essential component in maintaining cleanliness in demanding conditions.

- Hydraulic hopper swivel

Hydraulic hopper slewing on a road sweeper allows the waste hopper's position to be controlled precisely, letting it be rotated or set at the required angle relative to the machine. This is particularly useful when emptying the hopper in hard-to-reach places, or when the discharge angle has to be matched precisely to skips or designated storage areas. With a hydraulic circuit the operator can control hopper slewing conveniently without leaving the cab, which makes work considerably more comfortable and more efficient. Hydraulic hopper slewing works smoothly and precisely, which matters particularly in demanding conditions such as confined working space or uneven ground. This is not only practical but also streamlines operating the sweeper, minimising the time needed to handle the machine.

- Side brush

The side brush on a road sweeper is the working element that allows hard-to-reach places — kerbs, corners and the strips along walls — to be cleaned precisely. With a side brush fitted, the sweeper can effectively remove dirt from areas the standard main brush cannot reach. The side brush is usually mounted on the left or right side of the sweeper, and its position can be adjusted hydraulically or mechanically so that its operation can be matched to the particular ground conditions. Made of hard-wearing materials such as wire and polypropylene, the side brush stays durable and effective even in difficult conditions such as clearing leaves, mud or other debris. The side brush considerably increases the versatility and effectiveness of a road sweeper, making it an ideal solution for keeping pavements, roads, yards and urban spaces clean. It allows the machine to clean edges and corners thoroughly — areas that are often missed during standard sweeping.

- Pins

Pins play a key role in a road sweeper as connecting and pivoting elements that keep the machine's individual mechanisms durable and running smoothly. They join the sweeper's moving parts — brush arms, suspension and adjusting elements — allowing them to work precisely and reliably. Being highly resistant to mechanical loads and abrasion, the pins keep the structure stable and give the machine a long service life, even under intensive use. Their design allows forces to be transmitted in rotary or linear motion, which is essential for functions such as brush angle adjustment and raising or lowering the sweeping unit. Pins are usually made of high-grade steel, which makes them resistant to corrosion and mechanical damage. They are an important factor in the safety and efficiency of a road sweeper, whether it is used for clearing snow, sweeping leaves or cleaning roads, pavements and yards. Regular maintenance of the pins, greasing included, is essential to keep the sweeper fully functional and durable.

- Other hitches - on request

Detailed description:

• The road sweeper is a versatile unit designed for effective cleaning of a variety of surfaces, such as pavements, roads, yards and industrial areas.
• Thanks to its compact width of 1400 mm and its solid construction, the sweeper performs excellently in tasks such as removing leaves, clearing snow and cleaning dust and dirt from large areas.
• The unit is adapted for mounting on a tractor, a farm tractor, a loader, a forklift or a compact tractor, thanks to a mounting system in the three-point standard, 3-point linkage cat. II, which ensures versatility of use.
• They have been fitted with hydraulic lifting of the waste hopper, which allows the 140-litre container to be emptied easily, and also with a rubber skirt that reduces dust being thrown up during work, increasing comfort of use.
• A brush diameter of 600 mm and easily replaceable brushes ensure effective cleaning of both fine dirt and larger debris.
• The use of pneumatic wheels effectively damps vibrations, guaranteeing smooth and stable work even on uneven ground.
• Optional equipment such as a 200-litre water tank, hydraulic hopper turning, a solenoid valve or a side brush allows the functionality of the unit to be increased further, adapting it to more demanding applications.
• The sweeper is compatible with various hitches, available on request, which further extends the mounting possibilities.
• The hydraulic drive with a flow of 40-60 l/min and a pressure of 140 bar ensures reliable and efficient operation. Thanks to its compact design and weight of 325 kg, the sweeper is easy to operate and manoeuvre, which makes it an ideal tool for professionals and private users alike.
• The street sweeper is an indispensable machine for pavements, for roads, for snow clearing and for clearing leaves, one that combines durability, functionality and modern solutions while meeting the highest standards of cleanliness.