Staltech beam subsoiler 3.0 m / 4 tines

Would you like to set the specification and tailor the subsoiler to your individual needs?

We can prepare a mounting for any type of equipment — tractor, excavator, loader, forklift and many other machines

Get in touch with our sales engineer!

E-mail address: sklep@agrowow.pl

Telephone number: +48 880 261 210 | +48 504 947 222

We will gladly help you choose the right configuration and answer any question you may have.

- Manufacturer: Staltech

- Catalogue number: ST3BEL4Z

- Manufacturer's designation: Beam subsoiler

- Working width: 3000 mm

- Number of tines: 4

- Weight: 950 kg

- Power requirement: 130-150 HP

- Body spacing: 560 mm

- Protection: shear

- Frame height: 900 mm

- Hitch: 3-point linkage cat. II and III

Optional extras at additional cost:

- Tube roller Ø 500 mm

This is a type of press roller made up of rotating tubes with a diameter of 500 mm. Its job is to break up soil clods, level the soil and provide the right degree of consolidation of the ground after loosening. It is a versatile solution that performs well on lighter soils.

- Packer roller Ø 500 mm

The Packer roller is a heavy consolidating roller with a diameter of 500 mm that crushes and levels the soil very well. Its design allows the ground to be firmed thoroughly, which helps to preserve moisture and creates ideal conditions for sowing. It is particularly recommended for heavier soils or after ploughing.

- Gable roller Ø 500 mm with cleaning scrapers

The gable roller with a diameter of 500 mm features a profiled, gable-shaped ring construction which crumbles the soil well and at the same time consolidates it lightly. Cleaning scrapers prevent the roller from clogging with wet soil, which is important when working in more difficult conditions (for example after rain or on heavier soils).

- Double disc row 510 mm

This is a set of two rows of discs with a diameter of 510 mm, which serve to mix soil, plant residues and, where required, fertilisers. The discs break up the soil, level its surface and help to blend organic matter thoroughly with the earth. They are most often used in tillage-seeding units or tillage units as a component that intensifies seedbed preparation.

- Double spiked roller with hydraulic adjustment (cannot be combined with a double row of discs)

It consists of two rows of rollers armed with steel spikes which additionally loosen the soil while at the same time consolidating and levelling it. Hydraulic adjustment makes it possible to set the pressure of the roller on the ground precisely. A roller of this type performs well on compacted soils that are difficult to break up. It cannot be fitted at the same time as a double row of discs, because they perform a similar function and occupy the same place in the structure of the machine.

Detailed description:

• The beam subsoiler with a working width of 3000 mm is a high-class agricultural implement designed for deep soil cultivation without inverting it.
• The machine has been designed for intensive use on farms that expect not only solidity but also high work efficiency over large areas. With a working width of a full 3 metres, the unit allows tillage operations to be carried out quickly and effectively, significantly shortening the time needed to prepare the field.
• Equipped with four massive working tines spaced 560 mm apart, the subsoiler provides even loosening of the subsoil and effectively eliminates the plough pan, which in turn improves the permeability of the soil and encourages better development of the root systems of plants.
• The tines have shear protection, which protects the structure of the machine from damage should it strike hard obstacles below the surface of the ground, such as large stones or compacted lumps of soil.
• This is a solution particularly appreciated by users working in difficult terrain conditions.
• The frame of the unit is 900 mm high, which guarantees adequate clearance and enables efficient work even on heavy soils or on soils with a large amount of crop residues.
• Thanks to this, the subsoiler retains full functionality also when working on fields that require regeneration of the soil structure.
• The massive construction and solid manufacture, with a total weight of 950 kg, provide stability for the machine during work and the right pressure on the ground, which translates into an even working depth and effectiveness of the operation.
• The beam subsoiler is designed to work with tractors with an output of 130 to 150 HP, which makes it ideally suited to medium-sized and large farms equipped with more powerful power units.
• The category II and III 3-point linkage hitch used guarantees wide compatibility with various types of agricultural tractor, which makes this model very universal in everyday work.
• This tool will work very well in the preventive improvement of the physical properties of the soil, in preventing erosion and in improving the conditions for the absorption of rainwater.
• Regular use of the subsoiler helps to rebuild the natural structure of the soil, makes its aeration easier and supports root development in the deeper layers of the soil profile.
• The 3.0 m beam subsoiler is a reliable, efficient and durable tool for farmers who expect effectiveness, safe operation and solid workmanship.
• Its versatility, simple design and resistance to overloading mean that it will serve for many seasons, even under intensive use.
• This is the ideal solution for those who want to improve the quality of their soil and increase the efficiency of crop production.