Tillage unit tillage cultivator hydraulic spring protection NON-STOP 4.5 m PRO

Would you like to set the specification and tailor the tillage unit to your individual needs?

We can prepare a mounting for any type of equipment — tractor, excavator, loader, forklift and many other machines

Get in touch with our sales engineer!

E-mail address: sklep@agrowow.pl

Telephone number: +48 880 261 210 | +48 504 947 222

We will gladly help you choose the right configuration and answer any question you may have.

- Manufacturer: Rolmako

- Catalogue number: RMO45KUPRO

- Manufacturer's designation: Multifunction tillage cultivator

- Model: U 436

- Version: hydraulic

- Working width: 4500 mm

- Number of tines: 16

- Power requirement: 195 HP

- Weight: 3600

- Protection: spring NON-STOP

- Roller: tube type Ø 500 mm

- Coulter: heart-shaped

- Levelling section: edge discs

- Tine: delta (chisel point and side undercutting share)

- Tine: boron steel

- Tine width: 350 mm

- Maximum working depth: 350 mm

- Working speed: 8-15 km/h

- Tine row spacing: 780 mm

- Distance between tine tracks: 260-285 mm

- Clearance under frame: 950 mm

- Spacing between beams: 800 mm

- Frame: 100x100x8 mm

- Working depth adjustment: hydraulic

- Transport lock

Optional extras at additional cost:

- AgriFlex tine (boron steel)

The tine made of boron steel of increased strength stands out for its considerable springiness and its resistance to cracking and wear. It enables efficient loosening of the soil at low draught resistance, which reduces fuel requirements and ensures even, stable operation of the unit.

- AgriFlex tine (hardfaced)

The hardfaced variant of the AgriFlex tine has an additional protective layer which increases the component's resistance to abrasion. As a result, the tine retains high working effectiveness for a long time, limiting the frequency of servicing and operating costs.

- AgriFlex tine (sintered carbide)

The model fitted with tungsten carbide tips is the most resistant version of the AgriFlex tine. The exceptionally hard working material performs excellently on stony, dry or sandy soils, guaranteeing maximum durability and resistance to wear.

- Maintenance-free EXTREME hub

The maintenance-free EXTREME hub has been created for operation without the need for regular greasing. A special system of multi-lip seals effectively protects the bearings against water, mud and contaminants, ensuring a long period of trouble-free use.

- Hydraulic working depth adjustment

The hydraulic depth adjustment system makes it possible to set the machine up in an instant, with no need to leave the tractor cab. This allows a rapid response to changing soil conditions and increases both comfort and working efficiency.

- Beam with spring finger rake

The bar fitted with springing elements is responsible for the final levelling of the field once the working tines have completed their job. The flexible tines break up larger clods and spread plant residues evenly, preparing the surface for subsequent operations.

- Extension to the semi-mounted version

Converting the tillage unit into the semi-mounted version consists in adding a running gear that takes over part of the machine's weight. Thanks to the transport bogie and the matching drawbar, stability during work and transport is increased and the tractor is less loaded, which improves the durability and manoeuvrability of the outfit.

- Pneumatic brake for the semi-mounted version

The pneumatic braking system improves safety during transport of the machine, especially at high weight. It provides strong, sure braking and stability when stopping, working with the tractor's pneumatic system.

- Hydraulic brake for the semi-mounted version

The hydraulic braking system, intended for tractors fitted with the appropriate installation, guarantees a fast response and a smooth braking process. It is simple in design, reliable and effective also at higher speeds and under heavy loads.

- Support wheels 185/65-15 (for the semi-mounted version 2 pcs.)

Wheels of this size ensure stable guidance of the unit and maintain an even working depth across the whole working width.

- Support wheels 400/60-15.5 (for the semi-mounted hydraulic version, 2 pcs.)

Wide and hard-wearing wheels guarantee confident machine operation on difficult terrain and under heavier loads, keeping the whole outfit highly stable.

- Delimbe catch crop seeder

The Delimbe seeder makes it possible to carry out cultivation and sowing at the same time. The accurate metering system allows the seed to be spread evenly, which reduces the number of passes and speeds up the work.

- Front reflective boards

The reflective boards increase the visibility of the outfit during transport and work, considerably raising the level of safety.

- Rear beam with LED lighting

The bar fitted with powerful LED lamps guarantees very good visibility even in poor lighting. LED technology is characterised by low power consumption and vibration-resistant durability.

- Number plate holder with lighting

The frame with built-in LED lighting allows the registration plate to be mounted correctly. Its robust construction, resistant to rust and damage, ensures long-lasting use.

- Cage roller with toothed bars Ø 460 mm - The roller with bars fitted with teeth effectively crushes compacted soil and levels its surface, which is particularly useful on heavy soils.

- Packer toothed roller Ø 460/550 mm - The Packer roller firms the soil intensively, improving its structure and retaining moisture, which favours the creation of an optimum seedbed.

- Tube-and-ring roller Ø 450 mm - A design combining tube and ring elements makes it possible to crush, aerate and level the soil at the same time, ensuring very good preparation of the ground.

- Crosskill roller Ø 400/500 mm - The Crosskill roller, equipped with self-cleaning cast-iron rings, allows the soil to be finished off accurately while keeping its natural structure intact.

- Ring roller Ø 500/600 mm - The ring roller provides even consolidation and aeration of the soil, performing well on various types of ground.

- Spring roller Ø 470/550 mm - The spring working roller gently levels the field surface and breaks up smaller soil clods, which makes it ideally suited to light and medium soils.

- Rubber roller Ø 500 mm - The rubber roller follows unevenness in the terrain closely, damps out vibrations and ensures stable operation even in damper conditions.

- Tyre roller Ø 600 mm - The tyre roller effectively firms the ground and levels its surface, improving the stability of the unit's work in various soil conditions.

- Roller made of steel rings 48–52 HRC Ø 600 mm - The roller, made of hardened steel of high hardness, is distinguished by excellent resistance to abrasion, which allows long operation even at demanding sites.

- Spiral roller Ø 455 mm - The spiral roller intensively crumbles the soil and spreads it evenly across the entire working width.

- Tyre transport roller Ø 600/670 mm - A roller performing two functions – working and transport – it makes moving the machine easier and helps to maintain a constant working depth.

- T-ring roller Ø 500/600 mm - The roller with T-shaped rings allows effective consolidation and working down of the soil, which performs particularly well on compact soils.

- U-ring roller Ø 540 mm - The U-ring roller is used for even levelling, loosening and final tilling of the soil.

- Tandem tube roller Ø 400 plus cage roller Ø 400 mm - A set consisting of a tube roller and a cage roller provides comprehensive soil preparation — from crumbling to levelling — in a single pass.

- Tube tandem Ø 400 - The twin tube roller increases the operating stability of the machine and allows for more accurate seedbed preparation, particularly on lighter sites.

- Tandem U-ring Ø 540 mm - The arrangement of two U-ring rollers intensively consolidates the soil and levels it across the whole working strip.

- ORION prism roller Ø 500 mm - The ORION roller provides an even and stable degree of soil compaction, making it possible to obtain a perfectly prepared seedbed on various types of soil.

Detailed description:

• The hydraulic tillage unit with a working width of 4500 mm is an efficient and versatile implement intended for ploughless soil cultivation.
• The machine has been equipped with 16 tines made of boron steel, which ensures durability and high resistance to wear even during intensive work in varied field conditions.
• The construction, based on a solid 100x100x8 mm frame, guarantees stability and strength for the whole working assembly, while the NON-STOP spring protection shields the working parts from damage, allowing uninterrupted work without the need for manual intervention.
• The tillage cultivator uses delta type tines fitted with a chisel and a side undercutting share, which allows effective mixing of the soil and intensive undercutting of plant residues.
• The tine working width of 350 mm and the under-frame clearance of 950 mm ensure the free flow of organic matter and prevent the machine from clogging.
• With a tine row spacing of 780 mm and a distance between tracks of 260–285 mm, the unit guarantees even loosening and preparation of the soil for further agrotechnical operations.
• The machine can work at a depth of up to 350 mm, which allows both shallow and deep tillage.
• Efficient operation is provided by a working speed in the range of 8-15 km/h, which additionally improves the intensity of soil mixing.
• The levelling section with edge discs is responsible for levelling the surface of the field, while the Ø 500 mm tube roller finally crushes, compacts and stabilises the soil, preparing it for sowing.
• Hydraulic working depth adjustment allows the settings to be changed quickly from the tractor cab, which increases the comfort and productivity of the operator.
• An additional transport lock ensures safety when moving the machine on public roads.
• A power requirement of 195 HP and a weight of 3600 kg make the unit a solid and efficient partner on a modern farm.
• Thanks to its design, the 4500 mm tractor cultivator performs excellently in reduced tillage systems and in min-till cultivation.
• The machine acts as an alternative to the plough, offering the possibility of intensive soil mixing, loosening of its deeper layers and effective management of crop residues.
• Carrying out several operations simultaneously in a single pass significantly lowers running costs, fuel consumption and working time.
• The benefits of using a cultivator include improved soil structure and a greater ability to retain water, a reduction in erosion processes, lower outlay on fuel and on machine maintenance, and keeping to optimal agrotechnical dates even across large acreages.
• Using a tillage unit also makes it possible to limit exhaust and carbon dioxide emissions, which makes the work more environmentally friendly.
• The 4500 mm agricultural unit is a reliable solution for farms that value high output, versatility and cost-effectiveness.
• Its excellent working parameters, solid construction and the ability to work across a wide range of depths classify it as an irreplaceable implement in soil cultivation.