Tillage unit tillage cultivator spring beam protection 4.0 m

Would you like to set the specification and tailor the tillage unit to your individual needs?

We can prepare a mounting for any type of equipment — tractor, excavator, loader, forklift and many other machines

Get in touch with our sales engineer!

E-mail address: sklep@agrowow.pl

Telephone number: +48 880 261 210 | +48 504 947 222

We will gladly help you choose the right configuration and answer any question you may have.

- Manufacturer: Rolmako

- Catalogue number: RMO40KUGS

- Manufacturer's designation: Multifunction tillage cultivator

- Model: U 436

- Working width: 4000 mm

- Number of tines: 15

- Power requirement: 170 HP

- Weight: 1985

- Protection: spring beam

- Roller: tube type Ø 500 mm

- Coulter: heart-shaped

- Levelling section: edge discs

- Tine: delta (straight mouldboard)

- Tine: boron steel

- Maximum working depth: 350 mm

- Working speed: 8-15 km/h

- Tine row spacing: 780 mm

- Distance between tine tracks: 260-285 mm

- Clearance under frame: 950 mm

- Spacing between beams: 800 mm

- Frame: 100x100x8 mm

Optional extras at additional cost:

- Reversible coulter

The double-sided coulter can work on two cutting edges, which significantly increases its service life. Being made of highly wear-resistant steel, it cuts into and loosens the ground effectively. It performs well on various soil types, guaranteeing efficient and stable operation.

- Stubble coulter 170 mm

The wide 170 mm stubble coulter is intended for intensive post-harvest cultivation. It mixes plant residues with the soil efficiently, undercutting the whole working strip thoroughly. It reduces the number of passes required and speeds up tillage work.

- Narrow coulter

The narrow coulter is used for deep loosening of the soil with minimal disturbance of its top layer. Ideal for work on hard and compacted soils, wherever high precision and good penetration are required.

- AgriFlex tine (boron steel)

The tine made of boron steel is distinguished by its flexibility and high resistance to cracking. It ensures effective loosening of the soil at low working resistance, which contributes to reduced fuel consumption.

- AgriFlex tine (hardfaced)

The hardfaced AgriFlex tine is provided with an additional protective layer that increases its resistance to abrasion. The extended service life of the component translates into less frequent replacement and lower operating costs.

- AgriFlex tine (sintered carbide)

The most resistant version of the AgriFlex tine, finished with sintered carbide tips. It is adapted to work on stony, dry and sandy soils, guaranteeing long-lasting effectiveness.

- Maintenance-free EXTREME hub

The EXTREME hub requires no additional lubrication. Thanks to its multi-stage seals, it effectively protects the bearings against water and contamination, ensuring reliability and a long working life.

- Hydraulic working depth adjustment

The hydraulic adjustment system makes it possible to change the working depth without leaving the tractor cab. It makes it easier to match the working parameters to the soil, increasing comfort and output.

- Beam with spring finger rake

The bar fitted with spring tines is responsible for smoothing the surface of the field after the working section has passed. It breaks up soil clods and spreads residues evenly, providing an ideal finish to the ground.

- Semi-mounted version (drawbar + tyre transport roller Ø600 with hydraulic working depth adjustment)

The semi-mounted variant fitted with a tyre roller and a drawbar increases stability while travelling and makes depth setting easier thanks to hydraulic adjustment. It provides better manoeuvrability and greater operating comfort.

- Upgrade to the semi-mounted version (drawbar + transport trolley, 400/60-15.5 tyres)

The upgrade kit makes it possible to convert the machine from mounted to semi-mounted. The chassis with wide 400/60-15.5 tyres improves stability during work and transport and reduces the load on the tractor.

- Pneumatic brake for the semi-mounted version

The pneumatic braking system makes it possible to stop the machine quickly and effectively. The system provides a high level of safety during road transport and meets regulatory requirements.

- Hydraulic brake for the semi-mounted version

Hydraulic braking provides smooth operation and precise control over the machine. The system is resistant to overloads and performs well both during transport and during work in the field.

- Support wheels 185/65-15 (for the semi-mounted version 2 pcs.)

The support wheels keep the machine at a stable working level and ensure an even tillage depth.

- Support wheels 400/60-15.5 (for the semi-mounted hydraulic version, 2 pcs.)

Wheels of great width and load capacity allow stable work on difficult terrain and under heavier loads.

- Delimbe catch crop seeder

The Delimbe system makes it possible to sow catch crops or fertilisers during a single pass. It ensures precise metering and even distribution of the seed material.

- Front reflective boards

Reflective boards increase the visibility of the machine, improving safety during transport and field work.

- Rear beam with LED lighting

LED lighting mounted at the rear improves the visibility of the machine after dusk and during transport. It is characterised by low power consumption and high resistance to vibration.

- Number plate holder with lighting

The frame with LED lighting allows a registration plate to be fitted in accordance with the regulations. The material, resistant to corrosion and mechanical damage, guarantees long durability.

- Cage roller with serrated bars Ø 460 mm - The finishing roller with bars featuring a serrated surface breaks up and levels the soil, performing excellently on heavy sites.

- Packer toothed roller Ø 460/550 mm - The toothed roller firms the soil, improving moisture retention and preparing a uniform seedbed. Deeply penetrating teeth increase the effectiveness of the work.

- Tube-and-ring roller Ø 450 mm - The combination of the advantages of a tube roller and a ring roller allows effective crumbling of clods and correct aeration of the ground.

- Crosskill roller Ø 400/500 mm - The Crosskill roller with self-cleaning cast-iron rings finishes the soil perfectly while preserving its structure.

- Ring roller Ø 500/600 mm - The ring roller guarantees even consolidation and aeration of the soil in all cultivation conditions.

- Spring roller Ø 470/550 mm - The spring roller gently levels the ground and breaks up soil clods, ideal for light and medium soils.

- Rubber roller Ø 500 mm - A roller built from rubber elements ensures optimum pressure, dampens vibration and performs well in damp conditions.

- Tyre roller Ø 600 mm - The roller of tyre segments intensively consolidates the ground and leaves a very even surface.

- Steel ring roller 48–52 HRC Ø 600 mm - A hardened steel roller with high resistance to wear provides a long service life even in difficult field conditions.

- Spiral roller Ø 455 mm - The spiral roller intensively crushes clods and spreads the soil evenly across the entire working width.

- Tyre transport roller Ø 600/670 mm - The roller combining a working and a transport function makes moving the machine easier and helps to maintain a set working depth.

- T-ring roller Ø 500/600 mm - A roller with T-shaped rings provides strong soil compaction and intensive final preparation.

- U-ring roller Ø 540 mm - The roller with U-ring rings levels the ground and ensures its optimal loosening.

- Tandem tube roller Ø 400 plus cage roller Ø 400 mm - The tandem combining a tube roller and a cage roller allows simultaneous crumbling, working down and levelling of the soil.

- Tube tandem Ø 400 - The double tube roller stabilises the guidance of the machine and thoroughly finishes the soil on light soils.

- Tandem U-ring Ø 540 mm - The tandem U-ring provides intensive consolidation and even preparation of the working surface.

- ORION prism roller Ø 500 mm - The hard-wearing ORION prism roller ensures even compaction and high effectiveness on various types of soil.

Detailed description:

• The tillage unit - a cultivator with a working width of 4000 mm - is a professional machine for min-till soil cultivation, designed for farms that expect maximum output and time savings when preparing the field.
• Equipped with 15 delta-type working tines made of reinforced boron steel, the cultivator provides intensive mixing of the soil and effective loosening of the arable layer to a depth of up to 350 mm.
• As a result it performs ideally both in shallow cultivation — undercutting the stubble and mixing post-harvest residues, and in deep cultivation that loosens the ground before subsequent operations.
• The design of the machine is based on a massive 100x100x8 mm frame, which guarantees durability, rigidity and dependable work in all conditions.
• A generous under-frame clearance (950 mm) together with the spacing between the bars (800 mm) allows work to proceed smoothly on fields with a large quantity of harvest residues, with no risk of blockages.
• Thanks to this the unit for a tractor maintains smoothness of work even in conditions of high moisture or with a large proportion of stubble straw.
• Tine protection in the form of a spring beam provides effective protection against damage - the tines deflect flexibly when an obstacle is encountered, which increases the safety of the machine and reduces the risk of breakdown.
• The heart-shaped coulters make it possible to undercut the soil effectively and mix it evenly, while the edge discs keep the line of cultivation straight, eliminating the build-up of soil ridges at the edges of the worked strip.
• A tube roller Ø 500 mm is fitted at the rear of the machine; it finishes the soil and stabilises the work of the unit, providing an even and firmed surface.
• Such a solution makes it possible to retain moisture in the soil effectively and to create an optimal seedbed.
• The working speed of the unit is 8–15 km/h, which allows the work to be carried out quickly, and the power requirement of 170 HP makes it an ideal solution for medium-sized and large farms.
• The tillage cultivator offers a range of economic benefits. Thanks to work in a non-inversion system the soil is not turned over, which limits the phenomenon of drying out and wind erosion.
• Tillage carried out in a single pass reduces the number of field operations, which cuts fuel consumption, limits the working hours of the machine and the operator and extends the service life of the equipment.
• The U436 tillage unit can lower the total cost of cultivation by as much as 50% compared with traditional methods based on ploughing.
• In addition, fewer passes reduce soil compaction and improve water retention in the arable layer, which has a direct impact on better plant growth and higher yields.
• An agricultural unit of this type allows tillage to be carried out in a single-pass system — loosening the soil, mixing plant residues and consolidating the surface all take place in one working cycle.
• As a result, the user saves time and fuel and increases the efficiency of field work.
• The 4-metre wide cultivator for a tractor can additionally be equipped with various types of coulters and finishing rollers, which increases its versatility and allows the machine to be matched to the particular type of soil and working conditions.
• If a farm is looking for an efficient soil cultivation machine that will perform well both on stubble and before sowing, the U436 tillage unit in the 4000 mm version will be the ideal choice.
• This is an investment that guarantees savings in operating costs, increases work efficiency and fits into modern min-till cultivation systems.