Tillage unit tillage cultivator spring protection NON-STOP 2.6 m

Would you like to set the specification and tailor the tillage unit to your individual needs?

We can prepare a mounting for any type of equipment — tractor, excavator, loader, forklift and many other machines

Get in touch with our sales engineer!

E-mail address: sklep@agrowow.pl

Telephone number: +48 880 261 210 | +48 504 947 222

We will gladly help you choose the right configuration and answer any question you may have.

- Manufacturer: Rolmako

- Catalogue number: RMO26KUNS

- Manufacturer's designation: Multifunction tillage cultivator

- Model: U 436

- Working width: 2600 mm

- Number of tines: 9

- Power requirement: 105 HP

- Weight: 1485

- Protection: spring NON-STOP

- Roller: tube type Ø 500 mm

- Coulter: heart-shaped

- Levelling section: edge discs

- Tine: delta (chisel point and side undercutting share)

- Tine: boron steel

- Tine width: 350 mm

- Maximum working depth: 350 mm

- Working speed: 8-15 km/h

- Tine row spacing: 780 mm

- Distance between tine tracks: 260-285 mm

- Clearance under frame: 950 mm

- Spacing between beams: 800 mm

- Frame: 100x100x8 mm

Optional extras at additional cost:

- AgriFlex tine (boron steel)

The tine, made from boron steel, is flexible and highly resistant to damage. It allows the soil to be loosened effectively at low draught resistance, which translates into lower fuel consumption and smoother running of the machine.

- AgriFlex tine (hardfaced)

The hardfaced AgriFlex tine has an additional reinforcing layer that considerably increases resistance to abrasion. As a result the working part has a longer service life and needs replacing less often, which lowers running costs.

- AgriFlex tine (sintered carbide)

The sintered carbide version is the most durable variant of the AgriFlex tine. The working tips made of carbide provide exceptional resistance when working on dry, sandy and stony ground.

- Maintenance-free EXTREME hub

The hub in the EXTREME version has been designed so that it does not require any additional lubrication. A system of multi-stage seals protects the bearings against dust and moisture, guaranteeing long and reliable operation.

- Hydraulic working depth adjustment

The hydraulic adjustment system allows the working depth to be changed without having to leave the tractor cab. It makes it easier to adapt the machine quickly to field conditions, increasing comfort and efficiency of work.

- Beam with spring finger rake

The bar fitted with sprung tines is responsible for the final levelling of the field surface. The spring elements break up compacted fragments of soil and spread plant residues evenly.

- Semi-mounted version (drawbar + tyre transport roller Ø600 with hydraulic working depth adjustment)

The semi-mounted version includes a drawbar and a Ø600 tyre packer roller, which increases stability and makes manoeuvring easier. Hydraulic adjustment allows the working depth to be set precisely, providing convenient operation.

- Support wheels 185/65-15 (for the semi-mounted version 2 pcs.)

The support wheels keep the machine at a constant working depth and stabilise its guidance during work.

- Support wheels 400/60-15.5 (for the semi-mounted hydraulic version, 2 pcs.)

Wheels of greater width provide better stability of the machine in the field and are intended for work with a heavier load.

- Delimbe catch crop seeder

The Delimbe seeder makes it possible to sow catch crops or spread fertiliser in a single pass. It ensures even metering of the material thanks to a precise control system.

- Front reflective boards

Reflective boards increase the visibility of the machine on the road and in the field, improving safety of use.

- Rear beam with LED lighting

The LED bar mounted on the rear part of the machine ensures good visibility during transport and work after dark. It features low power consumption and high resistance to shocks.

- Number plate holder with lighting

The solid frame fitted with LED lighting allows the plate to be mounted in accordance with the requirements of the regulations. The construction, resistant to damage and to the weather, provides long-term use.

- Cage roller with toothed bars Ø 460 mm - The cage roller with tines breaks up soil clods and levels the surface, which makes it an ideal solution for heavy sites.

- Packer toothed roller Ø 460/550 mm - The Packer roller compacts the soil and retains moisture, creating optimum conditions for sowing and for even plant growth.

- Tube-and-ring roller Ø 450 mm - The combination of a tube roller and a ring roller ensures effective crumbling of the soil and its aeration.

- Crosskill roller Ø 400/500 mm - The Crosskill roller with self-cleaning cast-iron rings finishes the soil perfectly, preserving its structure and levelling the surface evenly.

- Ring roller Ø 500/600 mm - The universal ring roller compacts and aerates the soil, performing excellently in a wide range of cultivation conditions.

- Spring roller Ø 470/550 mm - The spring roller gently levels the surface of the field and breaks up smaller clods, which makes it an ideal solution for lighter soils.

- Rubber roller Ø 500 mm - The roller with rubber elements matches the ground well and damps vibration, particularly in conditions of increased moisture.

- Tyre roller Ø 600 mm - The tyre roller compacts the soil intensively and leaves an even surface, performing well across a wide range of conditions.

- Roller made of steel rings 48–52 HRC Ø 600 mm - The steel roller hardened to 48–52 HRC is distinguished by exceptional wear resistance and long service life, even under intensive use.

- Spiral roller Ø 455 mm - The spiral roller effectively breaks up compacted fragments of soil and spreads it evenly across the entire working width.

- Tyre-transport roller Ø 600/670 mm - A roller serving both a working and a transport function makes it easier to move the machine and to maintain the set working depth.

- T-ring roller Ø 500/600 mm - The roller with T-shaped rings intensively finishes and consolidates the ground, ensuring ideal soil preparation.

- U-ring roller Ø 540 mm - The U-ring roller uniformly spreads and loosens the ground, providing a level field surface.

- Tandem tube roller Ø 400 plus cage roller Ø 400 mm - The tandem combining a tube roller and a cage roller crushes, finishes and levels the soil surface at the same time.

- Tube tandem Ø 400 - The double tube roller ensures stable guidance of the machine and thorough soil finishing, particularly on light soils.

- Tandem U-ring Ø 540 mm - The Tandem U-ring intensively compacts and evenly levels the ground surface across the entire working width.

- ORION prism roller Ø 500 mm - The ORION prism roller provides even consolidation of the soil and high work output regardless of the type of ground.

Detailed description:

• The tillage unit (tillage cultivator) with a working width of 2600 mm is an efficient machine intended for non-inversion soil cultivation.
• Thanks to its well-thought-out construction and the use of modern working parts, it allows both shallow and deep cultivation to a maximum depth of 350 mm, which makes it the ideal implement for pre-sowing work, mixing post-harvest residues, loosening and aerating the soil.
• The machine works with tractors from 105 HP upwards, which allows efficient operation also on medium-sized farms that focus on economical solutions and high output.
• The cultivator is equipped with 9 strong working tines made of boron steel.
• The delta-type chisel point used together with the side undercutting share ensures intensive soil mixing and precise undercutting of the entire working area.
• The tine working width of 350 mm guarantees effective operation in a single pass, shortening working time and reducing running costs.
• The 100x100x8 mm frame construction, a large clearance under the frame (950 mm) and a spacing between bars of 800 mm prevent the machine from clogging even with a large amount of post-harvest residue.
• This model features NON-STOP spring protection, which protects the working elements against damage in the event of hitting obstacles such as stones.
• Thanks to this, the tractor cultivator works smoothly, without the need for manual intervention or downtime.
• Final soil levelling is handled by the levelling section with side discs, which stabilise the field surface and prepare it for sowing.
• The final stage of the work is compaction of the soil by means of the tube roller with a diameter of Ø 500 mm, which ensures optimum moisture retention and the creation of an ideal seedbed.
• The tillage unit is characterised by high working output, operating at a speed of 8–15 km/h.
• The wide spacing of the tine rows (780 mm) together with the spacing between the tracks (260–285 mm) guarantees uniform soil mixing and a reduced number of passes across the field.
• Thanks to this it reduces fuel consumption and the time needed to carry out cultivation treatments.
• Using a cultivator for a tractor in min-till technology brings many economic and agrotechnical benefits, such as improved soil structure, increased water retention, reduced drying out of the soil and lower exhaust emissions.
• The user gains lower operating costs and the possibility of carrying out cultivation in a single-pass system.
• Compared with a traditional mouldboard plough, the cultivator generates lower draught resistance, which makes it possible to considerably reduce fuel consumption and labour costs.
• This is a solid, universal tillage machine intended for farmers who expect high output, durability and savings at every stage of soil cultivation.
• The 2.6 m cultivator for a tractor is an excellent choice both for farms developing simplified soil cultivation technology and for those that want to streamline field work while maintaining the highest quality of results.